The optimized AIMDROIX V2 Aluminum Arms will improve the
performance of your multirotor while giving it a professional and rugged look.
The arms were designed for aerial video and photography in mind but also for
FPV. Because of the extended length, you'll add 250mm in diameter to your
multirotor, improving your flight stability and also allowing it to use up to
17 inch props on your F450 quad (15in for hex, 15in max for TBS Discovery). The
arms have motor mounting slots that allows to use a variety of motor sizes
selections from 16mm to 25mm. Also, the arms work as a heat sink, dissipating
heat from the motor and transferring it along the arm; helping your motors to
run cool increasing life and efficiency.
Buy the original! Unlike arms from other companies, this arm
design was optimized using extensive engineering analysis to improve the arm
stiffness and durability. This makes them as light as possible, but much
stronger in cases where the stock plastic arms will easily break, and where
other aluminum arms will bend. As these aluminum arms are stiffer in all axes, they
will also not flex like the stock plastic arms or like poorly designed aluminum
arms.
With the optional AIMDROIX coaxial motor mounts, it will be
possible to convert your quad to an X8 configuration, allowing you to fly on
strong winds and to be able to lift even more payload.
FEATURES
Stronger and stiffer than the stock plastic arms.
125mm longer than stock DJI arms.
Works as a heat sink to dissipate heat from the motor.
CNC machined to give a nice surface finish and look that no
other multirotor will have.
Motor mounting holes: 16mm to 25mm
Allows for X8 or Y6 configuration with the AIMDROIX coaxial
motor mounts (optional)
Weight: 72 grams. (DJI Stock arms 54g)
Arms are 32mm tall at the root.
Fits: Aimdroix EVO ONE, DJI F450 & F550, TBS
Discovery(requires TBS discovery spacer kit, no modifications are needed), and
any other frame that uses DJI style arms.*
*These arms are slightly shorter in height than the stock
DJI arms. For frames such as the stock DJI Flamewheel frames where the arms
determine the distance between the boards, this is not an issue. For frames
that have a fixed height due to other components or standoffs, you will also
need to purchase one spacer for each arm. For the TBS discovery you'll need the
TBS Discovery spacers kit. There is no need to cut the arm as other aluminum
arms from other companies to clear the battery tabs.
Note: Users should verify that the motor mount screws don't
go in too far into their motor since these arms are thinner than the stock
arms!