The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately.
MAIN FRAME AND LANDING GEAR
The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes.
CAMERA MOUNTING SYSTEM
The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications.
DESIGNED FOR THE AIMDROIX ALUMINIUM ARMS
The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market.
- Innovative vibration isolated camera system.
- CNC machined aluminum parts
- Extruded carbon fiber and aluminum landing gear
- Configurations; Y6, Quad X4, Quad X8, Y4, V- tail Quad and Tricopter in a quad configuration.
- Smart battery stopper.
- No standoffs or sandwiched plates design.
- Low profile design for pancake type motors
- Frame Size: 615mm (with extended length arms)
- Max props size: 14in
- Can be configured as an X8 quad for extreme power. (If not using pancake type motors, lower prop size must be 13in or less.
- 1.5mm and 2mm G10 plates. (Optional 1.5mm Carbon fiber plates)
- Battery space between plates: 220mm x 53mm x 37 mm (LxWxH)
- Large battery capacity under the bottom plate up to 180mm x 105mm x 60mm(LxWxH) Enough for 6s hight capacity batteries for extreme endurance flights.
Optional (purchased separately)
-AIMDROIX coaxial motor mount kit
Build Manual Located HERE